The AROEVE MK01 air purifier is designed for rooms up to 287 ft² and uses a high-efficiency filter that captures fine particles. To maintain peak performance, the filter should be replaced regularly.
When to Replace the Filter
- The built-in sensor will trigger a red indicator light after approximately 2000 hours of use.
- In typical environments, this corresponds to about 3–6 months of operation.
- If airflow decreases or odors remain noticeable, consider replacing the filter sooner.
Preparation
- Turn off and unplug the purifier before beginning.
- Have a genuine AROEVE MK01 replacement filter ready.
- Place the unit on a stable, flat surface.
Steps to Replace the Filter
- Unplug the purifier from the power outlet.
- Unlock the base cover by turning it counterclockwise from LOCK to OPEN.
- Remove the used filter and discard it properly.
- Unpack the new filter and insert it into the compartment, making sure it is seated correctly.
- Turn the base cover clockwise back to LOCK until you hear a “click.”
- Plug the purifier back in and power it on.
Resetting the Filter Indicator
- After installing the new filter, press and hold the Timer/Reset button for 2 seconds.
- The buzzer will sound twice and the filter life light will blink 3 times, confirming a successful reset.
- If reset is unsuccessful, repeat the step or contact customer service.
Tips for Longer Filter Life
- Vacuum around the air inlet regularly to prevent dust buildup.
- Avoid placing the purifier in extremely dusty or smoky areas for prolonged periods.
- Use the purifier continuously in Sleep or Auto mode to balance performance and filter lifespan.